Custom Terrariums: How to Guide (Video)

Custom Terrariums from Home

Custom Terrariums: DIY
Custom Terrariums: DIY
Looking to create and build custom terrariums from home? Hopefully this article and video can point you in the right direction! This article would also be helpful if you are looking to convert an aquarium into a snake cage.

IN THIS ARTICLE:

  • Detailed description for Step by Step Process

  • Pros and Cons of a Glass Terrarium

  • Step by Step Video (Scroll to Bottom)

  • Pictures of Brazilian Rainbow Boa (Scroll to Bottom)

Should I build my own terrarium?

This is a good question. I believe you should only tackle a DIY build if:

    1. You aren’t trying to save money: DIY doesn’t always mean cheaper, after time and supplies doing-it-yourself can sometimes be more costly than purchasing something new.

 

  1. You actually enjoy building: This one seems obviously but some people go into a build with the idea that they are going to save money regardless of whether or not they enjoy building. Someone who doesn’t enjoy building will end up get very frustrated with the process and most likely spend MORE money than they would have if they just bought sometime brand new.

If you love to build and you don’t mind spending the money than you need to 100% move forward with your build! Custom terrariums will open up a door of possibilities for your animal, far beyond anything a store bought enclosure can provide.

In this article I breakdown my Custom Terrarium build for my Brazilian Rainbow Boa. If you want to skip right to the video, scroll right to the bottom of the article!

Side note: Why are Brazilian Rainbow Boas named after the rainbow? Scroll to the bottom for pictures of my boa… her colors will shock you!


Supplies and Plan

In the summer I stumbled across a stack of of old windows at a family farm. I immediately saw past their rough shape and started mentally building an enclosure out of them.

Old Windows

 

 

The windows cleaned up quite well and I was able to examine precisely what I had. What I had was this:

  • 8 Windows with dimensions of 36″ L x 21″ W

This would work!

Window Dimensions

There are very few examples of custom terrariums being built from glass for snakes (for reasons I discuss below) so I really had to think through a detailed plan to determine whether or not this would work.

Here is a picture of the sketch I came up with:

Sketch of Plan
When Building Custom terrariums: have a plan!

The plan was to:

  • Create a glass box using 3 full sized sheets of glass (36″ x 21″), 1 for the top, 1 for the bottom and 1 for the back.
  • I would have to cut glass for the side pieces which would measure roughly 21″ x 21″.
  • The front facing opening would be trimmed with “something” (at the time I wasn’t sure I was going to use glass or wood, I used wood).
  • A drop down acrylic door would be installed with the necessary ventilation drilled.
  • The sides, back and bottom would be blacked out with paint.

As I am typing this I am realizing this exact procedure would probably also be suitable for converting an aquarium or fish tank into a snake enclosure. 

The Glass Box

As stated about, the first step was to build the glass box.

First, I cut the glass for the sides. I used this cheap glass cutter dipped in mineral oil to score the glass. Once the glass was scored, a little bit of pressure was enough to force a break at the score line. Easy Peasy!

**Remember to wear safety glasses AND be mindful of the fact that the fresh cut edge of glass is sharp as hell!  Sand it down afterwards**

Cutting Glass
Cutting Glass

The actual assembly of the glass box was fairly straight forward. I followed Joey’s instruction from The King of DIY YouTube channel. If you’d like more detailed instructions on how to do this I highly recommend checking out his video here: https://www.youtube.com/watch?v=HSKIT2OLOYQ He has an AWESOME channel. Thanks for the help Joey!

Before I even started the build I spent some time thinking about the structure itself. How did I want the weight to be supported? It is very important to think this through.

Especially because I had to assemble the box in its wrong orientation. I.e. The front opening would have to face vertical during the assembly… assembling it in the right orientation would have required me to lower the top panel of glass on to the sides and back wall, I didn’t think that would be a smart way of doing it.

So the initial panel I placed flat on the table is actually the back panel. So back to the original point, how did I want the weight to be supported? Well I did not want any of the panels to be “hanging”, in other words I want the appropriate panels to be supporting the weight of the others.

Here’s how:

The side and back panels are placed directly on the bottom panel and the top panel is placed directly on top of the sides and back panels. This way the weight of the top panel is supported directly by the sides and back which is resting right on top of the bottom panel.

But remember… I had to assemble it out of its correct orientation so I had to keep that in mind. I.e. the “bottom” during the assembly was actually the back.

I set up strips of painters tape that could be flipped up once a sheet had been placed. The tape is strong enough to keep the glass in place while you work.

Other than that, all I did was run a bead of GE Silicone I (very important to use GE Silicone I and not II, I is non-toxic when dry) along the appropriate edges and place the glass in its rightful spot.

 

Custom Terrariums
Custom Terrariums

I used a square as I went to make sure things were straight. Silicone and glass is quite forgiving, you have time to move the panels around once they have been placed.

Squaring the tank
Squaring the tank: Custom Terrariums

Done!  Easy has that, it took only about 10 minutes from start to finish.

Glass tank

I did also add a bead of silicone on the inside seams to add more structure and a better seal.

Sealing inside seam
Sealing inside seam



Pros and Cons of  a Glass Terrarium

If you build your own custom terrariums you know there are pros and cons to the materials you use.  Here are the pros and cons of the glass terrarium I built.

Pros:
  • I already had the glass
  • Glass is relativity easy to work with
Cons:
  • It’s heavy
  • Hard to raise humidity- I solved that by having a front facing acrylic door that closes tightly
  • Too much light- snakes like to be in dark space, a clear glass terrarium can stress a snake out. I solved this by painting the sides black.
  • Hard to maintain temperature- glass tends to loose heat relatively easy compared to a plastic enclosure. I plan on using Reflectix to help insualte the walls… although I was also pretty surprised at how well the paint itself works as insulation.

Paint it Black

Time to paint the walls! This was also pretty straight forward.

A foam roller is really the best way to go here as it will not leave any brush marks.

Paint foam roller
Paint foam roller

At first I used regular black acrylic paint  as I was naive enough to think I would one have to do 1 MAYBE 2 coats. Wow was I wrong!  It took a good 5-6 coats to fully cover the glass, luckily the dry time between coats is very short (15 minutes).

Black acrylic paint
Black acrylic paint

The acrylic paint worked fine but since I required a larger volume of paint I upgraded to a quart of Black Indoor/Outdoor Latex paint. I didn’t notice a difference between the two types of paint, it was just cheaper to buy the latex paint due to the quantity I needed.

Indoor/Outdoor Latex Paint
Indoor/Outdoor Latex Paint

I alternated between doing one coat with horizontal strokes and one coat with vertical strokes and eventually…

Painting the walls
Painting the walls

It was finished! I was actually pretty happy with the result… although I was definitely nervous through the first few coats.. “Is this ever going to cover..?”

Custom Terrariums: Painted wall
Custom Terrariums: Painted wall



Wooden Trim

As stated above, I used wood to trim out the front facing hole where the door would go. I used:

  • Oak 1″ x 3″ for the bottom
  • Oak 1″ x 2″ for the top and sides

The purpose of the trim is three fold:

  1. Stop substrate from falling out
  2. A place to fasten the door and hinges
  3. A place for the door to rest and lock against

I decided to also paint the wood black to match the rest of the custom terrarium. I used the same latex paint from above, and I did 3 coats.

Painting Oak Runner Board
Painting Oak Runner Board
Painted Oak runner board
Painted Oak runner board

 

It was also important for me to seal the wood to protect it from moisture damage. I used 3 coats of Minwax Polyurethane to do the job.

Minwax Polyurethane
Minwax Polyurethane

I prepped the wood by running very fine steel wool over the entire surface to remove any fine hairs and wiped off the dust with a dry cloth. Then, I brushed on the polyurethane.

Brush on Minwax Polyurethane
Brush on Minwax Polyurethane

 

Sealing the wood with Minwax Polyurethane
Sealing the wood with Minwax Polyurethane

And of course, I went through the identical process with the side/top trim pieces!

Painting trim
Painting trim

The Sample Door

Now it was time to assemble the door. This was the part of the build I was the most worried about. Acrylic cracks quite easily and it is priced at $70/sheet!

So instead of jumping right into drilling the door panel … I decided to exercise some patience and used a scrap piece of acrylic and scrap piece of oak to build a “test door”.

I used black 3″ door hinges, pictured below. This way I could get a feel for what drilling through acrylic was like.

Test Door
Small Test Door

Instead of using screws for the top hinge, I replaced them with bolts and acorn nuts. Obviously, I couldn’t have 6 screws poking through the door into the enclosure.

Acorn nuts
Acorn Nuts



The Real Door

Once I felt ready I screwed the hinges to the bottom oak trim and then was ready to tackle drilling the holes for the door.

Attach Hinges
Attaching Hinges

I dry fit the acrylic door (I bought the acrylic sheet from the local hardware store and cut it to size) and marked off where the hinge holes needed to be drilled with a dry erase marker.

Custom Terrariums: Dry fit Door
Custom Terrariums: Dry fit door to hinges
Marking off hinge holes
Marking off hinge holes

Drill time!  The trick to drilling acrylic is you have to start small and slowly increase your bit size until you reach the desired size of hole. If you start with a bit to large, the acrylic will crack under stress… and so will you probably!

drill bits
9 bits for one hole!
Smallest Drill bit
Smallest Drill bit

Eventually I made it to the final bit… 2 hinges, each with 3 holes, each hole took 9 drill bits… wow!  But nothing cracked so going slow and steady was well worth it!

Last drill bit
Finally on last drill bit

I ended up having to make wooden spacers to sit between the hinge and the acrylic door. Without the spacer the door wasn’t sitting vertical, luckily the spacers completely corrected that. I eventually painted them black.

Wood Spacer
Wood Spacer

I also used black spray paint to paint the bolts black so they matched the hinge.

 

Spray painted bolts
Spray painted bolts

Whenever I create custom terrariums I try and make everything as professional looking as possible. I am happy with the way the hinges turned out, the wooden spacer completely blends in.

Completed hinge with spacer
Completed hinge with spacer

Mounting the Trim

At this point I was ready to fasten the wooden trim to the glass terrarium. Gluing wood to glass is a relatively uncommon thing to do… I’m not sure I have seen anyone else online build custom terrariums this way.

I used the products No More Nails as the main adhesive for this job. I have been very impressed with this stuff! It bonds well to almost anything.

I first roughed up the gluing edge of the wood with 60 grit sand paper, and then ran a generous bead of No More Nails down the entire length of the board.

No More Nails
No More Nails

I used spring clamps to hold everything in place for 24 hrs.

Clamped Runner Board
Clamped Runner Board

And then I followed the same process for the top and side trim!

Custom Terrariums: Trim
Custom Terrariums: Trim

Once everything was cured, I ran a bead of silicone on the inside seam to seal it and also provide extra support. Now that everything is dry, it feels incredibly sturdy!

As a nice touch, I also painted out the trip on the top. This way I could keep the top clear as a viewing panel but also could hide the No More Nails and Silicone that was holding everything together.

Top Trim
Top Trim
Top Trim painted black
Top Trim painted black



Cam Lock

The light at the end of the tunnel! All I had left to do at this point was to add locks to the door, and polish up the acrylic!

I went with cam (or cabinet) locks because they are quite easy to install and do a good job of keeping everything secure.

Cam Locks
Cam Locks

The only down side to these locks was the size of hole I needed to drill to fit them into the acrylic door.  The locks require a 3/4″ hole, the largest drill bit I own is 5/8″ so I had to get creative.

Once I reach the 5/8″ bit, I dropped back to a smaller bit and slowly “carved” out the hole to increase its diameter.

Carving out the hole
Carving out the hole

I also used sand paper and a whole lot of elbow grease to bring the hole to size.

Sanding the hole
Sanding the hole

Eventually, it fit!

Custom Terrariums: Cam lock installed
Custom Terrariums: Cam lock installed

Final Steps

A couple small things left and then I was done!

First, I had to polish the acrylic. Acrylic scratches pretty easily and over all the panel needed a good cleaning. I used a headlight buff kit to make the door as clean as I could!

Plastx Polish
Plastx Polish

I wasn’t quite satisfied with the way the door was locking. The cam locks made the door feel very secure on the top and sides, but I felt like the bottom could be flexed enough for a snake to try and squeeze through (and probably get stuck).

So I picked up some storm door panel clips and put one in each corner. This completely solved the problem!

Storm Door Panel Clips
Storm Door Panel Clips



Custom Terrarium Complete

And just like that, I was finished! I have to stay I am pleased with the way this turned out! It looks a lot better than I thought it would.

Here’s the deal

I made a plan, and I stuck to it! Scroll up to the top and take another look at the original plan sketch I drew up before starting the build.

 

Customer Terrarium
Custom Terrariums DIY

I live in an apartment, I do not own many tools. Because of that, I was required to very thoroughly plan the build. I built this terrarium in my head 100’s of times before even starting the work.

Custom Terrariums Drop down door
Custom Terrariums drop down door

Do not be intimated by making custom terrariums of your own! If you create a detailed plan and follow it, you can build anything you like! You do not need any expensive tools or specific craftsman skills, I have neither.

Custom Terrariums
Custom Terrariums made with glass

I hope this article can point you in the right direction, and like I said above, I believe this process would also work if you are wanting to convert a fish tank or aquarium into a terrarium!

CLICK HERE TO SEE THE TERRARIUM SET UP

Brazilian Rainbow Pictures (Click picture to expand)

Brazilian Rainbow Boa

Brazilian Rainbow Boa

Brazilian Rainbow Boa

Brazilian Rainbow Boa

Brazilian Rainbow Boa

Brazilian Rainbow Boa

Brazilian Rainbow Boa


 

Custom Terrariums Made with Glass Video

 



Thanks for visiting!

Privacy Policy   |  Affiliate Disclaimer  |  Full Disclaimer  |  Terms of Service  |  Copyright text 2021 by Animals at Home